Door Shed - Part 1

So I promised last week to show you how we were going building our door shed. 

For those who missed the last blog.....

I've been wanting a small shed to store all the tools and bits in, 

but wasn't wanting to spend hundreds on a shed! 

So I did some looking around and saw small sheds made out of doors,

 perfect for my needs and costing next to nothing just a few nails and screws are about the only costs I think.

 So we started with 3 doors, it should be 4 but we only had 3.

So what to do for the back since we were 1 door down?

We had this pallet so decided to use the board from it, it won't last as long as the doors and will need to be replaced at come stage but for now it will be fine and the paint will help make it last longer.

 Everyone helped with this project, Mason helping to remove nails.

 Hayden helping to cut the boards.

So we now have 3 doors and the back of our shed from the pallet.

We now need a floor.

 We had these left over from a pallet we pulled apart and added the slats of a couple of nice solid pallets.

 The finished product was a nice solid floor/base for our little shed!

So we now have all the basics for the walls and floor of our shed. 

Next blog will be the making of our shed.

 aus.keeys